*New Package:* Protector 16mm uncroppable hardened boron steel chain (select length below), plus *two* of our motorcycle-grade DIB-Series D-Locks (select size below, twice).
The chain is Sold Secure Motorcycle (Powered Cycle) Gold (in fact, it is Sold Secure Gold in every category) and the DIB D-Locks are Sold Secure Motorcycle Gold/Quad & ATV Gold/Bicycle Gold/Motor Scooter Gold approved.
The chain is 4.5kg/metre; each DIB D-Lock is another 1.5kg (for the 130mm size), or 1.7kg (for the 190mm one). The chain is supplied with usually bronze colour sleeving, and the chain itself is finished with a black electrophoretic coating.
3 keys supplied for each lock = 6 keys altogether.
Keyed-alike available at initial order only (not available retrospectively) when ordering more than one lock together, and only amongst other RL21 locks and/or these/other DIB-Series D-Locks. These locks can't be keyed-alike with any of the Squire locks. Please note that the Keyed Alike option must be selected for *all* other locks in the set that you wish to be Keyed Alike.
Noose Chains e.g. for Motorcycle Owners: This special Double DIB package can make an excellent option for portable security for motorcycles. Using a DIB D-Lock has always been a popular option with our chains and this package allows you to get a Double DIB setup at a very special price. You can choose the size of each DIB separately and both ends of the chain can be locked through or around tethering points such as street furniture. The disadvantage vs. a genuine Noose is that this set is heavier, although the DIBs can be carried separately (e.g. one in each pannier).
Price and weight shown are for the package including a 2.0m long chain - Please select alternative lengths below and the price displayed will be adjusted automatically.
The Protector 16mm chain has the following link dimensions (nominal): 132 x 62-64mmmm outside; 100 x 30-32mm inside, throughout its length (an elongated end link is not required). It is constructed from 16mm diameter bar. The smallest rectangular hole it will fit through is about 65 x 34mm, but that would also be a tight fit. It is again fitted with a protective fabric sleeve, usually a bronze colour (adding about 4mm maximum to the width noted above).
Click for more technical info on the Protector range of security chains.
Please click for more details on the DIB D-Locks.
The following video gives an overview of the Protector 16mm chain (opens in a new window)
The next video gives a quick visual tour of the whole Protector range of chains, from the ultimate Protector Titan chains, through to the Protector 11mm (opens in a new window)
The following video covers the SFB DIB D-Lock in some detail (opens in a new window)
