Shed Shackle, Protector 13mm long link medium-weight chain (select length below) with Squire Stronghold SS50CS High security CEN 4 padlock (usually supplied with the higher-security R1 restricted key profile, except when matching a previously-supplied standard-profile lock via the Keyed-Alike option).

Sold Secure Motorcycle Gold/Bicycle Gold on the chain and Motorcycle Gold on the lock. Recommended for high value bicycles and low value motorbikes/scooters. The chain is 2.9kg/m, the padlock is another 0.6kg, and the Shed Shackle another 3kg. The chain is supplied with usually bronze colour sleeving, and the chain itself is finished with either zinc plating or a black finish.

The Shed Shackle is available in Red and Black colours, and for wooden or metal sheds.

Please note the lock deliberately only fits a single link of the chain. Please click for guidance on how to fit the lock to the chain and some useful extra tricks.

Noose chain option has a special oversize ring at one end of the chain (only), allowing a noose to be formed by looping the chain through that ring. This is helpful with longer lengths of chain, avoiding the normal need to make a big loop around all items - A noose can be formed at the ground anchor and a second loop formed with the lock at the other end of the chain.

Price displayed is for the package including a 2.0m long chain - Please select alternative lengths below and the price displayed will be adjusted automatically.

Please click here for important information on suitability and further details.

Longer bolts are available at extra cost for wooden sheds with unusually thick timbers.

You can view or download the Fitting Instructions and further details.

The Protector 13mm chain has the following link dimensions (nominal): 106 x 48mm outside; 80 x 22mm inside. It is constructed from 13mm diameter bar and has a fabric sleeve that is usually bronze in colour (adding about 4mm maximum to the width noted above). If you've got a round hole 52mm diameter, the 13mm chain should slide through OK. It will also fit through a rectangular hole, e.g. 52mm x 35mm, but that requires the links to settle against each other, and more closely as the slot gets narrower, down to the absolute minimum of around 52mm x 30mm high (where it would be quite fiddley to get it to go through). Also available as a Noose Chain.

Click for a video overview of the Shed Shackle (opens in a new window)

The following video gives an overview of the Protector 13mm chain (opens in a new window)

The next video gives a quick visual tour of the whole Protector range of chains, from the ultimate Protector Titan chains, through to the Protector 11mm (opens in a new window)

And this video shows how to fit the lock to the chain (with a non-Noose chain) (opens in a new window)

And this video explains Protector Noose chains option (opens in a new window)