Replacement security chain sleeve

Replace your old or damaged sleeve with a length of pre-cut and pre-hemmed Protector bronze-colour woven polyester chain sleeving.

This is supplied *only* for use with our Protector 11mm, 13mm, 16mm, 19mm and 22mm chains. 

What's included:

• Chain sleeve
• 2 x cable ties

Please be careful to choose the correct chain gauge and also the required sleeving length. (Multiple sleeves can be joined end-to-end with a cable tie for longer lengths.)

Sleeve replacement method:

• Hang your chain from a suitable hook
• Cut the cable ties and slide off the old sleeve
• Slide on the new sleeve from the bottom up
• Position the end of the sleeve in the middle of the second link and slide the cable tie through the eyelets
• Connect the cable tie, pull it tight, and cut off the end
• Flip the chain and repeat the process

Fitments and widths:

11mm = approx 70mm

13mm = approx 80mm

16mm = approx 98mm

19mm = approx 115mm

22mm = approx 130mm

The 11mm sleeve will also fit 13mm Pragmasis chains, although it is tighter.

The 22mm sleeve will fit 19-22mm Pragmasis chains and is roomier on the 19mm.

Please note:

No chains or locks included.

Contact us if there's a length that you require which isn't listed here.