Torc Series 3 Ground Anchor Fitting Instructions
We produce multiple fitting kits for our Torc ground anchor, so that you can get the most secure fitment every time.
In each package you will get a full fitting kit and fitting instructions, together with all the relevant bolts. The concrete floor and injection resin kits include a 12mm masonry drill bit; the brick wall and block wall kits include a 16mm masonry bit. Those kits also include a length of plastic pipe to help you clean dust from the holes!
Click the links below to see the fitting instructions. These are in PDF format and can therefore easily be printed on paper.
BRICK WALL / CONCRETE FLOOR - EXPANDING BOLTS
Brick wall / Concrete ground anchor fitting instructions - If you're fitting to a brick wall or concrete, these expanding bolts will do the job well.
CONCRETE FLOOR - RESIN CAPSULES
Resin capsules ground anchor fitting kit instructions - These kits are supplied with chemical resin capsules and are ideal when installing into good quality concrete.
BLOCK WALL / BREEZE BLOCKS
Blockwall Torc ground anchor fitting instructions - If you're fitting your ground anchor into block work, like breeze blocks.
AWKWARD SUBSTRATES - INJECTION RESIN
Injection resin ground anchor fitting instructions - If you're fitting your ground anchor to a concrete substrate, the injection-resin kit is great for giving you a great fixing in mediocre substrate.